FS - Custom Helmets, Shield Handle, MOTUC Head Plug & More!

FS - Custom Helmets, Shield Handle, MOTUC Head Plug & More!

Postby BadVermin » Wed Jul 20, 2016 3:44 pm

Image

$3 Boxed Continental Shipping, no item limit.
International shipping available, typically ~$9

Orders can be placed via:
BadVermin@comcast.net

Available in Gold, Silver, Gunmetal and Black. Custom colors are available on request.

Barbute Helmet
Fits on Vampire, Skeleton & Orc heads
Image

Barbute helmet can be displayed either with or without horns on Skeleton head
Image

Kettle Helm
Image

Crown & Burgonet Helm
Image

Kettle Helm & Crown
Image

Viking & Burgonet
Image

Back Plug
Fits into slot on back of torso.
Image

Epic Shield Handle & MOTUC Adaptor
Figures can hold shield without clips. Works with all ML shields.
Image

Adaptor for all male MOTUC heads (Eldor, far right)
Image

Epic Shield Handle stores the shields on the figure’s back
Works with all shoulder pads
Image

Helms fit all Mythic legion Skeleton figures released
Barbute helmet fits on all Skeleton heads and can be displayed either with or with out horns
Horns, heads and Mythic Legions Figures not included
Last edited by BadVermin on Wed Aug 10, 2016 10:34 pm, edited 4 times in total.
Mythic Legions Accessories are now on sale! Check them out:
www.sourcehorsemen.com/forum/viewtopic.php?f=27&t=1516
BadVermin
Standard Grunt
 
Posts: 99
Joined: Wed Jun 15, 2016 2:29 pm
Location: MN

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby christianpyro » Wed Jul 20, 2016 4:53 pm

Thank you for making these, they look great!

I have a couple questions:

1) If you order 10 of the back plugs do all 10 have to be the same color, or could you order some of each color?
2) I see examples of the Gold, Silver, and Gunmetal (the orc helm) colors. Is there an example of the black?
3) Is it $3 shipping (continental US) for only 1 set of sets 1-3, or is it still $3 if you order multiple sets?
4) just out of interest, how much would it cost to get a custom color?
5) Are these paid for through Paypal?
6) Have they already been made and are ready to ship, or is there a production delay?

Sorry for the list of questions... :oops:
christianpyro
Bronze Apprentice
 
Posts: 1489
Joined: Thu May 12, 2016 1:03 am

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby BadVermin » Wed Jul 20, 2016 6:37 pm

I'm happy to answer any questions.

1) If you order 10 of the back plugs do all 10 have to be the same color, or could you order some of each color?
Mix & Match any paint colors you want.

2) I see examples of the Gold, Silver, and Gunmetal (the orc helm) colors. Is there an example of the black?
I'll post a picture of the black helm on the Vampire asap.

3) Is it $3 shipping (continental US) for only 1 set of sets 1-3, or is it still $3 if you order multiple sets?
$3 shipping option covers as many 1-3 sets as you want.

4) just out of interest, how much would it cost to get a custom color?
Custom Paint Color - No charge
Clear, Colored Smoke, Glow-in-the-dark and other custom pigments adds $3 per colorway.


5) Are these paid for through Paypal?
PayPal is my prefered payment type. I also have a 100% rating on ebay.

6) Have they already been made and are ready to ship, or is there a production delay?
I have a variety of colors in stock and ready to ship, orders typically arrive within a week of payment.
Custom pigments add anywhere from a day to two weeks depending on materials required.

Wholesale pricing and shipping options are available for large orders, but they take longer to be fulfilled.
Mythic Legions Accessories are now on sale! Check them out:
www.sourcehorsemen.com/forum/viewtopic.php?f=27&t=1516
BadVermin
Standard Grunt
 
Posts: 99
Joined: Wed Jun 15, 2016 2:29 pm
Location: MN

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby Sirsimon » Thu Jul 21, 2016 3:11 am

can i buy no. 4...how many do you have of no 4
Sirsimon
 
Posts: 4
Joined: Thu Jun 16, 2016 2:19 am

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby BadVermin » Thu Jul 21, 2016 1:06 pm

Sirsimon wrote:can i buy no. 4...how many do you have of no 4


I have that set in black, gunmetal, silver & gold cast and ready to ship.

I'm sitting on two 50 gallon barrels of plastic resin, so I can whip up as many as you need in a couple of hours.
Mythic Legions Accessories are now on sale! Check them out:
www.sourcehorsemen.com/forum/viewtopic.php?f=27&t=1516
BadVermin
Standard Grunt
 
Posts: 99
Joined: Wed Jun 15, 2016 2:29 pm
Location: MN

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby BadVermin » Fri Jul 22, 2016 4:13 pm

[EDITS]

I doubled the number of shield handles and MOTUC adapters.

Barbute now uses softer plastic, fits heads without having to heat.
Mythic Legions Accessories are now on sale! Check them out:
www.sourcehorsemen.com/forum/viewtopic.php?f=27&t=1516
BadVermin
Standard Grunt
 
Posts: 99
Joined: Wed Jun 15, 2016 2:29 pm
Location: MN

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby eewk » Tue Jul 26, 2016 7:47 pm

Just emailed you with my order. Can't wait to get these in hand. U can't imagine how many customs and mashups they'll enable!
Image
The death knell tolls as hope decays,
The faithful waits, the last few days,
For horsemen of four and a carriage of green,
To herald the end with the birth of a queen.
User avatar
eewk
Golden Grunt
 
Posts: 559
Joined: Mon Aug 12, 2013 1:50 am

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby BAT » Tue Jul 26, 2016 9:09 pm

These are awesome! Will place an order shortly. Any possibility you'll make some low profile/minimally decorative plugs for the sides of the dwarf helm and/or the top of the Silver Knight helm?
BAT
Bronze Grunt
 
Posts: 115
Joined: Wed Feb 11, 2015 1:26 am

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby GreenKnight » Wed Jul 27, 2016 1:21 pm

Just emailed over an order. Can't wait to see how these workout.
GreenKnight
Standard Grunt
 
Posts: 66
Joined: Mon May 30, 2016 1:51 pm

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby GreenKnight » Wed Jul 27, 2016 5:37 pm

are there any more pics of the MOTUC heads on ML bodies? I'd like to see which ones look good
GreenKnight
Standard Grunt
 
Posts: 66
Joined: Mon May 30, 2016 1:51 pm

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby blayne » Thu Jul 28, 2016 2:45 am

Very nice work on the custom helmets. :) Two questions though:

What material are you casting your pieces in? I assume tinted (Smooth-on?) hard resin, or a flexible one of some kind?

Is there any chance of getting casted pieces of the ML helmet batwings(like those attached to the blue helmeted #4_ and (non-antler #6) horn pairings by themselves?
I don't have any of those parts (only one set of antlers from my ML Gorgo), and would love to use hard-casted duplicates of the Batwing fins and Dwarf/Build-a-barbarian's Horns on multiple other figures.
Custom Props, Toys & Action Figures
http://blaynes-customs.blogspot.ca/
User avatar
blayne
 
Posts: 17
Joined: Wed Jul 13, 2016 11:12 pm
Location: Toronto, Ontario

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby BadVermin » Thu Jul 28, 2016 6:19 pm

I was reading this thread and wondering why nobody had sent any emails, turns out all the orders were being routed to my junk folder. I will be responding in the order they were sent.

ANSWERING SOME QUESTIONS:

The casting material for these ML accessories is 2/3rds tinted Smooth-on and one third plastic softener. The plastic used is slightly softer than the ML shins, it can bend and flex, but it's not as squishy as the loincloth sections. I can provide hard plastic versions for carving and customizing.

I will be posting new (and easier to understand) photos soon, along with another item for the Skeletons.

MOTUC heads that were in arms reach and looked good: Scareglow, Eldor, Fisto, Randor (first version), Oolar, Demo-Man, Val Kilmer, Eye-Patch Pony-Tail-Man

I do not sell any re-casts of the FourHorsemen's sculpts, I have way too much respect for their business to do that.
Mythic Legions Accessories are now on sale! Check them out:
www.sourcehorsemen.com/forum/viewtopic.php?f=27&t=1516
BadVermin
Standard Grunt
 
Posts: 99
Joined: Wed Jun 15, 2016 2:29 pm
Location: MN

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby eewk » Thu Jul 28, 2016 8:23 pm

Ooh! Can you please hold my order then? I'd like to see what's new for skeleton first. To be honest, I added the back plugs just to make up the 6th set for 50. I might replace it coz I've need for more skeleton parts.

Also a question, can a Barbute helm fit a Motuc mossman head with room for antlers? Got plans for a Satyr Knight using Silverhorn Sentry.

Thanks.
Image
The death knell tolls as hope decays,
The faithful waits, the last few days,
For horsemen of four and a carriage of green,
To herald the end with the birth of a queen.
User avatar
eewk
Golden Grunt
 
Posts: 559
Joined: Mon Aug 12, 2013 1:50 am

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby GreenKnight » Thu Jul 28, 2016 11:08 pm

I was starting to get worried as I hadn't heard anything. Looking forward
GreenKnight
Standard Grunt
 
Posts: 66
Joined: Mon May 30, 2016 1:51 pm

Re: FS - Custom Helmets, Shield Handle, MOTUC Head Plug & Mo

Postby christianpyro » Thu Jul 28, 2016 11:14 pm

GreenKnight wrote:I was starting to get worried as I hadn't heard anything. Looking forward



Me too. :D I emailed 5 days ago, and was wondering what happened.

Badvermin, if you could post here once you'v replied to everyone, that would be appreciated. That way we know if our email is lost. :)
christianpyro
Bronze Apprentice
 
Posts: 1489
Joined: Thu May 12, 2016 1:03 am

Next

Return to BST - Buy/Sell/Trade

Who is online

Users browsing this forum: No registered users and 2 guests